The finest quality auto products For personal service at web prices ring +44 020 8445 6811
Back to » Home : Dyna Beads :
Shopping cart is empty.
  • Dyna Beads Bike Tyres

    Dyna Beads Bike Tyres

    • For a glass smooth ride!
    • No more ugly weights to corrode and damage expensive rims.
    • Increases tyre life.
    • Dyna Beads are easy to install.
    • Dyna Beads can be used with tubes or tubeless tyres and are effective even for scooters.
    • Dyna Bead tyre balancers are 100% enviromentally friendly ceramic.
    • Impervious to moisture, and non-abrasive to inner liners or tubes.
    • No special air drying is needed.
    • Dyna Beads tyre balancers can be installed at the time of tyre mounting, or after, through the valve of the stem.
    • Note: Filtered valve cores NOT required for motorcycles. Simply check/add air when valve stem is on the bottom of the tyre. ( 6:00 position approx. )
    • All kits are pre-packaged in Dyna Beads branded packaging.
    • NB: If you plan to install through the valve stem then you will need an applicator* (only one needed - not per tyre) See fitting instructions here >>

    1) Find the correct weight of Dyna Beads using charts below.
    2) Order at the bottom of the page.
    If your tyre size is not listed or you are unsure, please call us for assistance - do not guess.

    • Std Tyres
      Front Tyres Width
      Beads p/tyre
      60 -110mm
      80 - 120mm (BMW Telelever only)
      120 -200mm
      Goldwing Tyres

      Rear Tyres Width
      Beads p/tyre
      60 -110mm
      120 - 240mm
      195 - 205mm Car Tyres
      250 -360mm
      Goldwing Tyres
      VTX with Goodyear Car Tyre
    • Scooter Tyres
      Front Tyres Width
      Beads p/tyre
      10" diameter wheels
      3 Wheeled Scooters* Wheels

      Rear Tyres Width
      Beads p/tyre
      11" and up diameter wheels
      3 Wheeled Scooters* Wheels

      **Piaggio MP3, Pia 150cc Trike, Yamaha Tricity etc.

    • Dual Purpose/Offroad Tyres with Rim Locks
      Front Tyres Width
      Beads p/tyre
      80 - 120mm

      Rear Tyres Width
      Beads p/tyre
      130 - 230mm

      Rim locks - the quantities above have 1 ounce added over what you normally use to accomodate the additional weight of the rim lock. Two rim locks opposite each other don't require any more Dyna Beads than those stated above as they have a tendency to cancel each other out. Tubed tyres and tyres already fitted onto the rims will need an applicator.

    • M-Series Bike Tyres
      FRONT TYRES
      Metric
      Alpha
      Inch
      Beads p/tyre
      Metric:
      120/80 
      Aplha:
       
      Inch:
      4.25/4.50 
      Beads p/tyre:
      Metric:
      80/90 
      Aplha:
      MH90 
      Inch:
      2.50/2.75 
      Beads p/tyre:
      Metric:
      90/90 
      Aplha:
      MJ90 
      Inch:
      2.75/3.00 
      Beads p/tyre:
      Metric:
      100/90 
      Aplha:
      MM90 
      Inch:
      3.25/3.50 
      Beads p/tyre:
      Metric:
      110/90 
      Aplha:
      MN90 
      Inch:
      3.75/4.00 
      Beads p/tyre:
      Metric:
      120/90 
      Aplha:
      MR90 
      Inch:
      4.25/4.50 
      Beads p/tyre:
      Metric:
      130/90 
      Aplha:
      MT90 
      Inch:
      5.00/5.10 
      Beads p/tyre:

      REAR TYRES
      Metric
      Alpha
      Inch
      Beads p/tyre
      Metric:
      120/80 
      Aplha:
       
      Inch:
      4.25/4.50 
      Beads p/tyre:
      Metric:
      80/90 
      Aplha:
      MH90 
      Inch:
      2.50/2.75 
      Beads p/tyre:
      Metric:
      90/90 
      Aplha:
      MJ90 
      Inch:
      2.75/3.00 
      Beads p/tyre:
      Metric:
      100/90 
      Aplha:
      MM90 
      Inch:
      3.25/3.50 
      Beads p/tyre:
      Metric:
      110/90 
      Aplha:
      MN90 
      Inch:
      3.75/4.00 
      Beads p/tyre:
      Metric:
      120/90 
      Aplha:
      MR90 
      Inch:
      4.25/4.50 
      Beads p/tyre:
      Metric:
      130/90 
      Aplha:
      MT90 
      Inch:
      5.00/5.10 
      Beads p/tyre:

      These codes are typical for Harleys but can be for any tyre. The codes do not go beyond 150mm in width. With these tyres, the first number of the tyre size is not the actual width, it is just a number. The M-code is what tells you the actual width.

      M-Code
      Size
      MH90
      Use 80mm width
      MJ90
      Use 90mm width
      MM90
      Use 100mm width
      MN90 or MP90
      Use 110mm width
      MR90
      Use 120mm width
      MT90
      Use 130mm width
      MU90
      Use 140mm width
      MV90
      Use 150mm width

    Dyna Bead Kit
    Description
    Price each
    Qty
    Order
    Dyna Beads Bike Kit 1
    1 x 1oz Bag
    1 x 2oz Bag
    1 x Applicator*
    1 x Instructions
    £16.68 + vat
    £20.02 inc vat
    Qty:
    Dyna Beads Bike Kit 2
    1 x 1oz Bag
    1 x 2oz Bag
    1 x Instructions
    £13.80 + vat
    £16.56 inc vat
    Qty:
    Dyna Beads Bike Kit 3
    2 x 2oz Bag
    1 x Applicator*
    1 x Instructions
    £21.28 + vat
    £25.54 inc vat
    Qty:
    Dyna Beads Bike Kit 4
    2 x 2oz Bag
    1 x Instructions
    £18.40 + vat
    £22.08 inc vat
    Qty:
    Dyna Beads Bike Kit 5
    2 x 1oz Bag
    1 x 2oz Bag
    1 x Applicator*
    1 x Instructions
    £21.28 + vat
    £25.54 inc vat
    Qty:
    Dyna Beads Bike Kit 6
    2 x 1oz Bag
    1 x 2oz Bag
    1 x Instructions
    £18.40 + vat
    £22.08 inc vat
    Qty:
    Dyna Beads Bike Kit 7
    1 x 1oz Bag
    2 x 2oz Bag
    1 x Applicator*
    1 x Instructions
    £25.88 + vat
    £31.06 inc vat
    Qty:
    Dyna Beads Bike Kit 8
    1 x 1oz Bag
    2 x 2oz Bag
    1 x Instructions
    £23.00 + vat
    £27.60 inc vat
    Qty:
    Dyna Beads Bike Kit 9
    2 x 1oz Bag
    1 x Applicator*
    1 x Instructions
    £14.38 + vat
    £17.26 inc vat
    Qty:
    Dyna Beads Bike Kit 10
    2 x 1oz Bag
    1 x Instructions
    £11.50 + vat
    £13.80 inc vat
    Qty:
    Dyna Beads Bike Kit 11
    2 x 2oz Bag
    2 x 1oz Bag
    1 x Applicator*
    1 x Instructions
    £30.48 + vat
    £36.58 inc vat
    Qty:
    Dyna Beads Bike Kit 12
    2 x 2oz Bag
    2 x 1oz Bag
    1 x Instructions
    £27.60 + vat
    £33.12 inc vat
    Qty:
    Dyna Beads Bike Kit 13
    3 x 2oz Bag
    1 x Applicator*
    1 x Instructions
    £28.74 + vat
    £34.49 inc vat
    Qty:
    Dyna Beads Bike Kit 14
    3 x 2oz Bag
    1 x Instructions
    £25.86 + vat
    £31.03 inc vat
    Qty:
    Dyna Beads Bike Kit 15
    3 x 1oz Bag
    1 x Applicator
    1 x Instructions
    £18.98 + vat
    £22.78 inc vat
    Qty:
    Dyna Beads Bike Kit 16
    3 x 1oz Bag
    1 x Instructions
    £16.10 + vat
    £19.32 inc vat
    Qty:

    *If you plan to install through the valve stem then you will need an applicator.


    Review this product

    1
    2
    3
    4
    5
    Select a rating for this Product.
    0
    (New reviews may take a day or two to appear)
Contact Us
Tel: +44 020 8445 6811
Email: info@killerbrands.co.uk
© Killer Brands