Your bike is more than just a machine; it's an extension of your identity, a faithful companion on your journeys, be it on the smooth roads or the challenging off-road trails.
To keep your two-wheeled companion in prime condition, regular maintenance is essential. In this blog, we'll explore the process of cleaning and ceramic coating your road or off-road bike using the Ecocoat Bike kit, a revolutionary solution designed to enhance and protect your ride.
Why Ceramic Coating?
Ceramic coatings have gained immense popularity in the automotive world for their ability to provide long-lasting protection and a stunning finish. The same benefits can be extended to your bike. A ceramic coating acts as a shield against environmental contaminants, UV rays, dirt, and water, making maintenance easier and ensuring your bike retains its showroom shine for an extended period.
Ecocoat Bike Kit:
Before diving into the step-by-step process, let's take a closer look at what the Ecocoat Bike kit has to offer:
Ecoclean Precoat:
Ecoclean Precoat is a powerful nanotechnology-based cleaner that effectively dissolves oil particles and eliminates polish residue, ensuring a flawless surface preparation for the application Ecocoat Bike
Ecocoat Bike:
A ceramic coating specifically formulated for bikes. Provides a durable, hydrophobic layer that repels water and contaminants’ resistance to prevent paint oxidation and fading.
Enhances colour depth and clarity. Now, let's get into the nitty-gritty of cleaning and ceramic coating your bike.
Step 1: Pre-Cleaning:
Before applying the ceramic coating, it's crucial to start with a clean surface. Use a good quality ph neutral shampoo to remove any dirt, grease, or contaminants. Use a soft brush or sponge to agitate and loosen stubborn dirt.
Step 2: Rinse Thoroughly:
After letting the shampoo dwell for a few minutes, thoroughly rinse your bike with a hose or pressure washer. Ensure that all residues are completely washed away, leaving a clean surface ready for the ceramic coating.
Step 3: Surface Preparation:
Inspect the bike's surfaces for any remaining contaminants. If needed, repeat the cleaning process until the surfaces are completely clean and dry.
Step 4: Application of Ecocoat Bike:
Follow the instructions provided with the Ecocoat Bike kit for the application process. Typically, it involves applying the ceramic coating in small sections, ensuring an even and thin layer. Use a clean applicator pad or cloth for application.
Step 5: Buffing and Curing:
After applying the ceramic coating, allow it to cure as per the manufacturer's recommendations. Once cured, use a clean, microfiber cloth to buff the surface, revealing a glossy and protected finish.
Conclusion:
Investing time in cleaning and ceramic coating your road or off-road bike with the Ecocoat Bike kit is a small effort that pays off in the long run. Not only does it keep your bike looking pristine, but it also adds a layer of protection against the elements, ensuring your two-wheeled companion is ready for any adventure that comes its way. Elevate your ride and experience the joy of a meticulously maintained and protected bike.
And the Ecocoat Air to keep you shoes smelling as good as your bike looks
Checkout the Ecocoat Bike Kit using the link below
