This Italian manufactured Snow Foam Lance/Cannon is the most reliable Foam Cannon available. It's standing one litre bottle means that you no longer need to worry about spills and tipping over.

When it comes to achieving a spotlessly clean vehicle, a high-quality foam cannon is an indispensable tool for car enthusiasts and professional detailers alike. The MTM PF22.2 Hydro Pro Snow Foam Lance/Cannon is a top-of-the-line choice that can revolutionise your car washing routine. In this guide, we will delve into how to use this incredible foam cannon and highlight the importance of regular servicing to maintain its performance. Additionally, we have added below a video tutorial on how to rebuild your PF22.2 Foam Cannon.

Using the MTM PF22.2 Hydro Pro Snow Foam Lance/Cannon:

  1. Initial Setup:

Before diving into the foam cannon usage, ensure that your pressure washer is compatible with the PF22.2 model. The foam cannon is designed to work with pressure washers that have a rated flow rate of 11.5L/ min and a pressure rating of 2,900 PSI.

  1. Preparing the Foam Solution:

Fill the foam cannon's reservoir with our Winners Snow Foam, mixed with water according to the instructions. It's essential to use a high-quality foam formula that is specifically designed for foam cannons to maximise the cleaning power and minimise any potential damage to your vehicle's paintwork.

  1. Attaching the Foam Cannon:

Connect the PF22.2 foam cannon to your pressure washer using the included quick-connect fittings. Ensure a secure connection to prevent any leaks during operation. The PF22.2 is known for its brass fittings, which provide excellent durability and a reliable seal.

  1. Adjusting the Spray Pattern:

The PF22.2 offers a variety of adjustable spray patterns to suit your needs. You can choose between vertical, horizontal, or a wide fan pattern by simply rotating the nozzle. Experiment with different settings to find the ideal spray pattern for your vehicle.

  1. Applying the Foam:

With the foam cannon connected and adjusted, you're ready to apply a thick layer of foam onto your vehicle. Start from the bottom and work your way up, ensuring that all surfaces are adequately covered. The dense foam will cling to the paintwork, allowing the cleaning agents to break down dirt and grime effectively.

  1. Dwell Time:

To allow the foam to work its magic, let it dwell on the surface for a few minutes. This dwell time varies depending on the specific foam formula you are using..

  1. Rinse and Dry:

After the dwell time, rinse off the foam using the pressure washer. Start from the top and work your way down, ensuring a thorough rinse to remove all the dirt and soap residue. Finish off by drying the vehicle using a Winners Premium Drying Towel or other high-quality drying aid.

Servicing the MTM PF22.2 Hydro Pro Snow Foam Lance/Cannon:

Regular servicing is crucial to maintain the optimal performance and longevity of your foam cannon. The PF22.2 is designed for easy disassembly, cleaning, and maintenance. To assist you in this process, the guys at Obsessed Garage have produced a comprehensive video tutorial titled "How to Rebuild Your PF22.2 Foam Cannon." This video guide walks you through the step-by-step process of dismantling,


Car cleaningCleanFoam lance mtm pf22.2

Leave a comment

All comments are moderated before being published